! ! It is of critical importance that the GoPro cameras are inserted into the Mission Cam 4 housing in the correct order. ! !
Failure to ensure this will result in poor image alignment at a later stage.
Press all 4 power buttons in turn
Check the battery bars on each camera LCD display to ensure full charge.
Press all 4 Wi-fi buttons in turn.
Check that all 4 blue lights are flashing.
Turn on the remote control.
Check that all 4 cameras are connected.
Check the mode on the Remote Control before starting to capture media. We recommend using the video mode.
Use the Mode button to cycle through modes if necessary.
Check the position and orientation before filming.
Check Remote shows 4 Cameras before pressing capture button.
Press capture button to capture media.
Check Remote shows 4 Cameras before pressing capture button.
Press capture button to capture media.
Press and hold the Start/Mode button on the remote.
Check that all 4 LCD displays are off.
Press and hold each camera's Wi-fi button in turn.
Check that all 4 blue lights are off.
Plan filming carefully, considering the potentially long transfer and processing times required for large amounts of media.
Carefully remove the SD card from camera 1 and insert into the first card reader in the USB Hub provided.
Recharge the batteries to ensure they are ready for use
Most issues that may arise are due to insufficient power.
If any of the lights or displays show a persistant error message try removing the battery / re-insert and power up again.