Starting Mission Room Open

I

IMPORTANT: To avoid issues it is best to start your Mission Room Open system up in the correct sequence:

Plug in

Ensure the system is plugged into the wall power sockets and that any switches on the sockets are turned on.

Turn on the TV screens

Use the power button on the right hand side of the TV (or the remote control provided) to power up each TV or screen in turn.

Check that all power indicator lights (usually positioned to the lower right of the TV)  have changed colour (usually from Red to Green or Blue). This indicates that all the TVs are on and ready.

Turn on the PC

Press the power button on the PC to switch it on. 

You should hear the PC start up and windows boot up.

Mission Room OS will start automatically, and will minimise if it finds a valid User License attached to the system.

If the Mission Room OS fails to start correctly click here 

Congratulations your Mission Room Open system is now running.

Turn on your handset

To read about starting the handset and logging in to Mission Room read this article.